Chatsworth Products RIM-600 - Manual (Page 78)

RIM-600 Manual
78
The summary will be replaced by a graph for the chosen Environmental/IP item. (See following
figure.)
Figure 50: Graph of AC Power
Updating the Web Page
You can enable Automatic Updates of the data and select the interval between updates by right-
clicking on the Host and selecting Network Settings. Click on the WebView tab. Check the
Automatic Refresh box and enter the number, in seconds, between updates, in the Update Every
box.
Figure 51: Web Page Refresh Enabled
Remote Web Page
The RIM-600 can send a copy of its web page to another web server via FTP (File Transfer
Protocol), so that the web page can be viewed on another network (for example, on the Internet).
To configure the unit to FTP the web page, right-click on the Host and select Network Settings.
Next, click the tab labeled Web Page Delivery. A sample screen is shown below.
78