Chatsworth Products RIM-600 - Manual (Page 76)

RIM-600 Manual
76
Up to 128 cameras can be configured in a RIM-600 system. These can be a mix of Axis cameras,
Axis camera servers, and Panasonic devices. Once the camera(s) have been configured they can
then be associated with a particular Host or Node so that links for these cameras will appear within
the menu tree for the chosen unit. You can associate a camera with more than one device if desired.
To associate one or more cameras, right-click on Cameras within the menu tree for the selected
host or node. See screen sample below.
Figure 48: Associating Cameras
The window on the left lists all cameras programmed into the system. The window on the right lists
cameras associated with the selected Host or Node. To move a single camera to the other window,
highlight the camera and click the single left/right arrow. To move all cameras to a new window,
simply click the double arrows. This will copy all listed cameras to the other window.
If you click on Cameras you will see thumbnails of all associated cameras. To view a large image
of a particular camera, simply click on the image.
Caution: The Panasonic and Axis cameras are Ethernet devices. They should be connected
to your Ethernet network only. They do not connect directly to your RIM-600 Host or Node
unit. Connection of either the Panasonic or Axis Cameras directly to your RIM-600 may cause
undesirable results.
76