Chatsworth Products RIM-600 - Manual (Page 75)

Chapter 2: Software
75
Configuring a Video Camera
The RIM-600 is compatible with the following network cameras.
Axis:
205 241Q
206 (CPI PN# 60065-001) 241S
206M 2100
206W 2120
210 2400 Server
211 2400+
213PTZ (unable to PTZ in Console View) 2420
2460 DVR
(no Quad View as on Web page; clicking
on image switches image to next camera)
Panasonic:
KX-HCM8 (CPI PN# 60065-005) BL-C10A
KX-HCM10 KX-HCM280
These are all network video cameras that allow you to view live streaming video or capture images
to e-mail when an alarm occurs. The camera or server connects to your network via an RJ-45 jack
and supports 10/100 Mbit networks. Up to 128 cameras or servers may be associated with each
Host or Node. The RIM-600 ConsoleView Software allows you easily to click and view live video
wherever your camera is installed.
When an Axis Camera Server is used, up to four cameras can be viewed at the same time. You can
view a single camera by clicking on the video image you want to display. If you click again, it will
return to the quad image. You can also capture a still image from either the quad or single camera
display by right-clicking and choosing Capture Image.
The first step is to get the camera running on your network. This process is independent of the
RIM-600. Follow the instructions included with the camera to get it set up. Once the camera is
properly set up, go into the RIM-600 ConsoleView Software. Cameras are added to the RIM-600
by expanding the Settings menu and right-clicking on the word Cameras. Choose Add Camera.
This will bring up the Camera Setup screen (see below). Enter the IP address, port number, and
security settings (if required) of the camera according to how it has been configured on your net-
work. See sample screen below:
Figure 47: Camera Setup
Select the camera type by clicking on the drop-down arrow and selecting the camera. Click OK
when Finished.
Chapter 2: Software
75