KERN & SOHN MLS 50-3C - Manual (Page 10)

10 MLS_C-BA-e-1330
4 Basic Safety Precautions
4.1 Pay attention to the instructions in the Operation Manual
Carefully read this operation manual before setup and commissioning,
even if you are already familiar with KERN balances.
All language versions contain a non-binding translation.
The original German is binding.
4.2 Personnel training
The appliance may only be operated and maintained by trained personnel.
4.3 Danger Information
WARNING
! The moisture analyser is used to analyse the moisture content of materials.
This instrument must be used exclusively for this purpose. Any other usage
may cause a risk to personnel, damage to the instrument or other material
damage.
! The moisture analyser should be used mainly for the drying of aqueous
substances.
! The moisture analyser may not be used in a hazardous area.
! The instrument may only be operated and maintained by trained personnel.
! Carefully read this operation manual before setup and commissioning, even if
you are already familiar with KERN instruments.
Hazards during and after measuring
! Ensure correct installation of all components, see chap. 6.2
! Careful when removing the sample. The sample itself, the sample dish and the
heating unit may be very hot.
! Use the sample retainer at all times as it allows safe working and prevents
burns.
! Individual parts of the case (e. g. the ventilation grids) may heat up
considerably during operation. Therefore, only take hold of the instrument by
the marked handles.