KERN & SOHN MLS 50-3C - Manual (Page 59)

MLS_C-BA-e-1330 59
Press the arrow keys (
 ), to select “ Profile“
Press  -button
Press the -key anew; the current menu item blinks
Press the arrow keys (
 ), to select among the
heating programs below plus the related parameters
• Standard
• Step-by-step
It is possible to increase the temperature step-by-
step. The number and size of steps can be selected
at will, see chpt. 11.8.
• Soft
Temperature is slowly increased. It is possible to
adjust the lengths of the ramp, see chpt. 11.8
• Fast
Temperature is increased very quickly and for a
short while exceeds the set temperature value.
Afterwards the temperature is lowered to processing
temperature and kept there until the end of the
process, see chpt. 11.8
Confirm by pressing the
PRINT key



The heating program is selected first, followed by the
related parameters. (temperature/drying time)
Press the  -button ; the cursor (►) marks the
adjustable parameter
Press the - button anew and the current setting will
flash
Press the arrow keys (  ), to carry out the desired
setting
Confirm entry by pressing the
PRINT-key and enter
additional parameters as follows.
For the selection of "standard"
or "fast" enter temperature
afterwards
For the selection of “soft“ enter
temperature and drying time
afterwards
For the selection of “step-by-
step” enter temperature and
drying time for step “1” and “2”
afterwards