KERN & SOHN MLS 50-3C - Manual (Page 58)

58 MLS_C-BA-e-1330
9.2.2 Setting drying parameters
Operation Display
Press
Menu-key; library opens
Information:
The most recent program used is shown in P00
Press the arrow keys (
 ), to select “ Program No“
Press  -key; parameter options of program appear.
Parameter selection is achieved with the help of the
arrow keys
(
 )
1. Name
Press the -key; the current menu item blinks
How to enter the desired denomination:
Press the
  keys, to select the characters
Press the
  keys, to select the digit on the
left/right (relevant enabled digit flashes).
Confirm entry by pressing the
PRINT-key and enter
additional parameters as follows.
2. Profile
This is used to select a suitable heating program as well as to enter drying
chamber temperature and drying time.