KERN & SOHN MLS 50-3C - Manual (Page 41)

MLS_C-BA-e-1330 41
Example in drying mode:
------------------- Start drying-------------------
Program nb : 1
Name : Floar 100
Profile : Standard
Dry temp. : 120 °C
Switch off : Automatical 3
Result : Moisture contents - %M
Printout int : 30 s
Target : None
T. coeficjent : 0.00
Start weight : 9.993 g
0:00:30 0.01 %M
0:01:00 0.02 %M
0:01:30 0.03 %M
Final mass : 9.990 g
Dry time : 0:01:45
Final result : 0.03 %M
--------- End of drying procedure ---------

Header

Measured
values

Footers
8.2.4.2 User defined data output (1 st printout ↔ 4 th printout)
Here you can define 4 different types of data output.
 The content of the data output is defined as follows.
First line
1. Printout start - 0.1, i.e. text begins at line 1 (1. Text)
Last line
1. Printout stop - 20, i.e. text ends at line 20 (20. Text)
 Text input per line is carried out via the arrow keys (see chapter 7.1)
in the respective strings.
1. Text
Start
of text input
20. Text
End of text input
During text input lines may overlap, e.g.:
1. Printout start - 1
1. Printout stop - 40
2. Printout start - 20
2. Printout stop - 40