Leitz VariPlan Plus User Manual
Page 11
D
eu
ts
ch
En
gl
is
h
日日
本本
語語
中
文
Ita
lia
no
Fr
an
ça
is
Es
pa
ño
l
Po
rt
ug
uê
s
Ру
сс
ки
й
11
04/2012 ID.524660 V1.0
MEC (mechanical feed)
Tools marked with “MEC“ shall only be used on machines with mechanical feed!
MAN (hand feed)
Tools marked with “MAN“ are also allowed to be used on machines with mechanical feed!
With feed direction: Forbidden due to danger of kick back!
1.3.3
Working method
1.3.4
Material to be machined
Wood, wood-based material, as well as material with comparable cutting properties as per
catalogue details. Special applications only after release by the manufacturer.
1.4 Safe handling
1.4.1
Application
The tool is only allowed to be used as described in the section “Intended use”.
The valid national rules for accident prevention and safety at work regulations have to be
observed - especially the safety requirements according to EN 847-1.
1.4.2
Transport
Wear safety gloves!
Danger of injury by sharp cutting edges!