Leitz VariPlan Plus - Manual (Page 13)

D
eu
ts
ch
En
gl
is
h
日日
本本
語語
中
文
Ita
lia
no
Fr
an
ça
is
Es
pa
ño
l
Po
rt
ug
uê
s
Ру
сс
ки
й
13 04/2012 ID.524660 V1.0
1.4.4 Mounting on the machine
The tool has to be mounted, locked and started up on the machine as per the instructions
of the machine manufacturer.
Starting the machine during the tool change is not allowed (see handling instructions of
the machine).
Wear safety gloves!
Danger of injury by sharp cutting edges!
Before using the tool check the cutting parts, clamping screws and clamping elements for
correct and tight seating.
Danger of injuring from parts flying off.
The limits for the tool weight, -diameter and projection length recommended by the
machine manufacturer have to been observed.