PRG Mbox Remote Manual 3.9 - Manual (Page 102)

96 MBOX ® REMOTE USER MANUAL
The Intensity Master is inhibitive.
The color channels work no matter if the fixture is RGB or CMY, however, the fixture on the lighting console should be
patched in RGB order. If the console has an advanced color picker, then this can be used with CMY sliders while still
outputting RGB values.
The protocol used to control the groups must be the same as the protocol selected for control of Mbox. (As set in the
Mbox Setup window.)
To create and add fixtures to a group, edit the group field in the Fixtures Patch tab. As fixtures are assigned to groups,
those groups will automatically be created and the channels required will automatically be assigned. Use the Groups
tab to enable/disable the Groups feature and to configure the universe setting.
Fixtures may also be assigned to groups using the Edit Fixtures window. This is useful when adding numerous fixtures
to a group. (Refer to
"Editing Fixture Properties" on page 76 for more information about this window.)