Indicators – PRG Mbox Remote Manual 3.9 User Manual
Page 15
MBOX
®
REMOTE USER MANUAL
9
Indicators
The Mbox Remote window has several indicators that provide system information.
Server status - The color-coded dot in the Servers column indicates the running status of the server:
+
Green - Server connection good, Mbox running in Fullscreen mode.
+
Green/Yellow Flashing - Server connection good, Mbox running in Window mode.
+
Yellow - Server connection good, Mbox not running.
+
Red - No server connection (Mbox Daemon not running on server, or network set up incorrectly/not connected).
+
Blue - server in Backup mode running in Fullscreen mode.
+
Blue/Yellow Flashing - server in Backup mode running in Window mode.
Note: The server connection status is dependent on the Mbox Daemon application running on the Mbox server(s).
The Mbox application can be running, but unless the Daemon application is also running, Remote will display a red
dot and will not provide any feedback. It will also display a red dot if the network is not set up correctly or is not
connected regardless of whether Daemon is running.
Server IP Address - each Mbox server’s IP address is shown under the server’s name. (For more information about IP
Address settings for Mbox, refer to
"Appendix A. Networking For Mbox"
Local Timecode Value - if the computer running the Remote application is receiving timecode locally, that timecode
value will be displayed at the top-right of the Mbox Remote window.
Server Timecode Value - if an Mbox server is receiving timecode locally or over the network, that timecode value will
be show to the right of the server’s IP address in the Servers column.
Layer Opacity - the vertical white line to the left of each layer video stream represents the opacity value of that layer.
Playback Position, In/Out Points - the length of the green line below each layer video stream represents the position
of the layer’s current in and out point values, and the yellow dot represents the current playhead position.
Server Status Indicator
Server Name and IP
Timecode
Layer Opacity
Playback Position