PRG Mbox Remote Manual 3.9 - Manual (Page 33)

MBOX ® REMOTE USER MANUAL 27
Step 6. Press [  E] to open the Projection Editor window. At the top of the Projection Editor window, you will see
the name of the selected server and the two Identity values in parentheses - e.g. "Mbox123 (1,2)". On the
left side of the Editor window you will see a column listing the two Output Identities belonging to the
selected server. To edit the settings for an output, select the appropriate Identity in this column.
The remainder of the Projection Editor window is devoted to the area where the settings will be configured.
In Basic Mode, you will only see a tab called "Projection" on the primary level and a tab called "Output
Setup" on the secondary level. (Hereafter referred to using hierarchical notation: Projection > Output Setup.)