Carrier Access CMG Router - Manual (Page 136)

5-4 CMG Router - Release 2.7
Profile Directory:Remote Profile
Remote (WAN) Profile
Remote (WAN) Profile
The fields on the Remote (WAN) Profile Setup window allow you to define how and
when data transmission will occur with a specific remote device. This includes defining
the protocol(s) that it will use to send and receive data, defining security information,
static networks and WAN lines. The local Adit unit will depend on this information to
determine communication guidelines with remote sites.
The Remote (WAN) profile can support up to 24 remote profiles.
The Remote (WAN) profile complements the Local (LAN) profile. The remote profiles
identify which remote devices the local unit can communicate with by defining the data
transmission requirements of each remote device. The local profile defines the local
unit’s transmission requirements and may appear as a remote profile in each remote
unit’s profile directory. It is important to understand that the information contained in
the remote profile determines how the local and remote units establish communication.
1. On the Main Menu, press [T AB ] until Configuration <Profile Directory> is
highlighted, and press [E NTER ].
2. Select WAN <Setup -> on the RemoteUnit line and press [E NTER ].
Profile
Directory
Window