Basic voip setup, Overview, Basic voip setup -3 – Carrier Access CMG Router User Manual
Page 229: Overview: -3
Advertising
CMG Router - Release 2.7
11-3
Router
Configuration
Basic VoIP Setup
Basic VoIP Setup
This example is with an Adit 600 with the following cards installed:
Controller Card (4.0 or higher)
CMG Router Card, 1.0 or higher (example - slot 6)
3 FXS Cards, 1.03 or higher (example - slots 1, 2 and 3). Cards are configured for
Loop Start POTS lines.
Overview:
Adit 600: the DS0s supporting the bundled service delivery will be cross-
connected to the CMG card
Adit 600: the CMG voice channels are connected to the FXS channels
Adit 600 CMG: the VoIP parameters and data parameters are configured
Adit 600 uses endpoint prefix "aaln" and endpoint suffix "1-48" i.e. channel 1
would be suffix "1", channel 5 would be suffix "5"
Adit 600 Implementation in VoIP Application
Advertising