Carrier Access CMG Router - Manual (Page 170)

5-38 CMG Router - Release 2.7
Profile Directory:Remote Profile
Spanning Tree
Spanning Tree
NOTE: This option does not display on the Remote WAN Profile Setup, until
the Router CARD profile/Spanning Tree is enabled AND the Remote
Profile is set to <Bridge>.
The Spanning Tree configures the setup for the Spanning Tree Algorithm.
To Configure Spanning Tree:
1. Select Configuration <Profile Directory> from the Main menu, and
[E NTER ].
2. Select WAN < Setup -> and select [E NTER ].
Profile
Directory
Window