Carrier Access CMG Router - Manual (Page 150)

5-18 CMG Router - Release 2.7
Profile Directory:Remote Profile
Static/VPN Networks
4. Select [C TRL A] to add a Static IP Network. Enter Network Address, Subnet
Mask and Metric value.
Static/VPN Networks Fields
Setup Static
<IP Networks> Enter the Subnet IP Address. Note: The host bits should all be zero.
Network
Enter the Subnet IP Address. Note: The host bits should all be zero.
Subnet Mask
Enter the Subnet Mask of the Network IP Address.
Metric
Enter the distance, in hops, to the network. Value must be between 1-15.
VPN Features
GRE Tunnel
Displays the Tunnel Name defined on the VPN setup window.
Encrypt
Displays the set encryption type, defined on the VPN setup window.
To set up the VPN features press
[E NTER ] while the VPN is selected.
Note: This field only displays if the following is set up on the Remote Profile Window:
- GRE Tunnel is enabled (<By Network> or <All>), and
- NAT Gateway is <Disabled>, and
- Local IP Tunnel Address is <Configured>
Static/
VPN
Networks
Window