Carrier Access CMG Router - Manual (Page 193)

CMG Router - Release 2.7 7-7
Verification Window
Trace Route
3. Press [E NTER ]. The Trace Route window will display.
Trace Route Utility - <START TRACERT> - >
After all parameters are entered, select <START TRACERT> and [E NTER ] to start the trace.
DstHost
Enter an IP Address or, domain name to use for this query. IP Address must be in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255.
Src Port
Scroll through the available options (Local LAN and Remote Units).
SrcIP Port
The source IP address from any of the routers numbered IP addresses. Default is the IP address
of the router interface used to send the packets.
InitialTTL
This optional parameter defines the beginning of the range of hops to query. Range is
1 - 254 value, Note: must be less than MaxTTL. Default is 1.
MaxTTL
This optional parameter defines the end (or the maximum) of the range of hops to query. Range
is 2 - 255 value, Note: must be more than InitialTTL. Default is 30.