Connecting to the router, Establish a telnet session, Connecting to the router -6 – Carrier Access CMG Router User Manual
Page 20: Establish a telnet session -6
Advertising
1-6
CMG Router - Release 2.7
Introduction
Connecting to the Router
Connecting to the Router
Establish a Telnet Session
1. Use the
telnet {slot}
CLI command to connect to the Router card. The
following example is when the router is located in slot 5.
> telnet 5
Connected.
Escape character is '^]'.
Attempting Carrier Access Adit connection...
Adit [Tue Aug 10, 2004 23:20:36] (<CR> to login)
2. Select [E
NTER
] or <CR> to log in.
Password >
3. Enter default password (
admin
) and select [E
NTER
].
Password >*****
Select a terminal type...
(<space> or <back-space> to toggle, <CR> to accept)
Terminal: <VT100>
4. Select Terminal Type: scroll through options with the [S
PACEBAR
] and then
[E
NTER
] to select. Recommended generic.
Terminal: <
generic
>
Advertising