Expansion panel address setting, Expansion operation panel ep-029, Expansion junction panel jp-039 – Toa FS-970 SERIES User Manual
Page 41
0 1 2
3
4
5
6
78
9A
B
C
D
E
F
Address switch
(Address setting to 1)
Expansion Junction Panel
JP-039-10
Expansion Junction Panel
JP-039-20
41
1 0 F
E
D
C
BA
98
7
6
5
4
3 2
Address switch
Expansion Operation Panel
EP-029-20
Expansion Operation Panel
EP-029-10
(Address setting to 1)
11. EXPANSION PANEL ADDRESS SETTING
11.1. Expansion Operation Panel EP-029
When your system contains the 10-Zone Expansion Operation Panel EP-029-10 or 20-Zone Expansion
Operation Panel EP-029-20, the address number needs to be assigned to each expansion unit.
• Use consecutive numbers starting with 0 to set the address.
First unit
: Address 0
Second unit : Address 1
Third unit
: Address 2
Fourth unit
: Address 3
Eleventh unit : Address A
Sixteenth unit: Address F
11.2. Expansion Junction Panel JP-039
• Systems incorporating the 10-Zone Expansion Junction Panel JP-039-10 or 20-Zone Expansion Junction
Panel JP-039-20 require that the address number be assigned to each expansion unit, as with the
expansion operation panel.
• As with the Expansion Operation Panel, assign the address using consecutive numbers starting with 0.
First unit
: Address 0
Second unit : Address 1
Third unit
: Address 2
Fourth unit
: Address 3
Eleventh unit : Address A
Sixteenth unit: Address F
• The address switch is located
behind the zone name label at the
lower right. Set the switch using a
screwdriver for watch repair.