Toa FS-970 SERIES - Manual (Page 54)

24 VDC
Less than 200 mA
Input 1-A: –2 dBV/–62 dBV (changeable), 600 Ω, balanced, phone jack
Input 1-B: –2 dBV, 600
Ω, balanced, phone jack
Input 2-A: –2 dBV/–62 dBV (changeable), 600 Ω, balanced, phone jack
Input 2-B: –2 dBV, 600
Ω, balanced, phone jack
Input 3-A: –2 dBV, 20 k
Ω, unbalanced, phone jack
Input 3-B: –2 dBV, 20 k
Ω, unbalanced, phone jack
Input 3-C: –2 dBV/-22 dBV (changeable), 50 k
Ω, unbalanced, phone jack/RCA jack
Input 3-D: –2 dB, 50 k
Ω, unbalanced, RCA jack
Line output 1: 0 dBV, 600
Ω, balanced Outputs all inputs
(Outputs only inputs 1 and 2 when line output 2 is in use.)
Line output 2: 0 dBV, 600
Ω, unbalanced Outputs input 3.
Recording output: –10 dBV, 5 k Ω, unbalanced same output as line output 1
50 Hz – 15 kHz within ±3 dB
±10 dB (1kHz) at 100 Hz and 10kHz
Better than 60 dB
Less than 1%
Order: (1) Input 1, (2) Input 2, (3) Input 3
Priority signal level: Set input level
Panel: Black
482 (w) x 88.4 (h) x 218 (d) mm
3 kg
Phone plug cable (balanced type) x 1, power connector cable x 1,
5-pin DIN plug x 1, 5 x 12 screw (black) x 4, Input ID label x 1
54
• Pre-amplifier Panel PP-025B
PP-025B
Power Source
Current Consumption
Input
Output
Frequency Response
Tone Controls
S/N Ratio
Distortion
Priority3
Finish
Dimensions
Weight
Accessories
CK-025 (optional for PP-025B)
24 VDC (supplied from PP-025B)
1. Ascending 4-tone chime 2. Two-tone chime 3. Gong
4. Single tone chime 5. Descending 4-tone chime
30 g
Chime cable x 1, M3 x 6 screw x 2
Power Source
Tone Types
Weight
Accessories