YSI MultiLab 4010-2 - Manual (Page 100)

Settings MultiLab 4010-2
100 ba76142e03 08/2013
10.7.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <ENTER_> key in the measured
value display.
Setting Default settings
Language English
Audio signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator Dot (xx.x)
Brightness 10
Temperature unit °C
Stability control on