YSI MultiLab 4010-2 - Manual (Page 110)

Transmitting data MultiLab 4010-2
110 ba76142e03 08/2013
12.6 Data transmission to the USB-A interface
(USB memory device)
Via the USB-A interface, you can transmit data to a USB memory or USB
printer device. How to transmit data to a USB printer device is described in an
extra section (see section 12.6 D
ATA TRANSMISSION TO THE USB-A INTERFACE
(USB MEMORY DEVICE ), page 110).
The following table shows which data are transmitted to the interface in which
way:
12.7 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
12.8 BOD Analyst Pro
With the aid of the BOD Analyst Pro software you can administrate BOD
measurement on the PC and automatically calculate the measured values.
Data Control Operation / description
Stored mea-
sured values Manual All datasets with the Output to RS232/
USB function.
For details, see section 11.3.1 E
DITING
THE MEASUREMENT DATA STORAGE , page
104
Calibration
data storage Manual All stored calibration records of a sensor
with the Calibr. data storage to USB flash
drive function.
For details, see menu for calibration and
measurement settings of the sensor.
More detailed information can be found in the MultiLab Importer
operating manual.
More detailed information can be found in the BOD Analyst Pro
operating manual.