YSI MultiLab 4010-2 - Manual (Page 21)

MultiLab 4010-2 Operation
ba76142e03 08/2013 21
Forgotten the
password?
Contact the administrator.
4.5 Navigation
4.5.1 Operating modes
4.5.2 Measured value display
In the measured value display, you can

use <><> to select one of several connected sensors. The selected
sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
 open the menu for calibration and measurement settings with <ENTER>
(short keystroke)
 open the Storage & config menu with the sensor-independent settings by
pressing <ENTER_> (long keystroke, approx. 2 s).
 change the display in the selected measuring screen (e. g. pH <−> mV) by
pressing <M>.
4.5.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
5. In the Password field, enter the old password with <><> and
<><>and confirm it with <ENTER>.
6. In the New password field, enter the new password with <><> and
<><>and confirm it with <ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
Operating
mode Explanation
Measuring The measurement data of the connected sensor are shown
in the measured value display
Calibration The course of a calibration with calibration information, func-
tions and settings is displayed
Storage in
memory The meter stores measuring data automatically or manually
Transmittin
g data The meter transmits measuring data and calibration records
to a USB interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed