AEG 5210 V - Manual (Page 11)

As soon as the appliance is connected to the mains supply (and
also after a power cut), the indicator in the electronic timer flashes
|jM]rg|,
When you have set the correct time of day the appliance is
ready to operate.
Press knob E to release. {This does not apply to appliances
with an enamelled control panel.)
When finished with knob E press to retract. (This does not
apply to appliances with an enamelled control panel).
Press buttons B 0 and C Q the same time, hold them in
position, and' set the actual time of day by turning the knob E
The time of day appears for you in display F. Now the oven
is ready to operate.
Before using the ovens for the first time, clean all accessories
(shelf supports, wire shelves and pans) with warm water and
washing-up liquid. Then switch both the ovens either to the con­
ventional or the hot air cooking method (as appropriate) and se­
lect the highest temperature and leave both ovens on for at least
one hour with both oven doors closed.
During this period there is an unavoidable odour which is not
harmful to your health,
We recommend that the room is well
ventilated for your convenierice.
When the ovens have cooled down, clean any parts not lined with
catalytic self-cleaning panels with water and washing-up
liquid.
Switching
on the
electronic
tinier
Setting the
time of day
You should
also be aware
of the
following:
^re-cleaning
the ovens
11