AEG 5210 V - Manual (Page 19)

Using the
automatic
cooking plate
To use the automatic cooking plate on a manual basis proceed as
follows;
Frying
- Place the frying pan on the hob and turn the control knob to 9
to heat the pan. Place the food to be fried into the pan and
lower the heat setting to 6. If this is too high or low adjust ac­
cordingly.
Cooking
- To bring the food to the boil turn the control to setting 9. To
reduce the heat turn the control to a setting between 1 and 5 as
required.
Intermediate settings, e. g, 3 • {or *2 on appliances with electron­
ic indication) can also be selected,
The chart below will give you some recommendations for the use
of the settings between 1 and 9.
The automatic system relieves you of having to turn the control
to 9 first to heat pan and contents and then reduce the heat by
turning to a lower setting as described above.
To use the automatic system proceed as follows:
- Turn control clockwise to A to activate the automatic system,
then turn control to a setting between 1 and 8 as required.
Setting 9 is ineffective vdien using the automatic sys­
tem.
Turning the control to A first provides an initial heat-boost to the
cooking area before it automatically resets itself to the lower
setting chosen. The length of the heat-boost is selected auto­
matically by the system. On model 573 V this period is indicat­
ed by a light,
- The automatic system can be cancelled by turning the controls
to 0.
19