AMT Datasouth 41AY89AR777 User Manual
Page 119
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Printhead snags ribbon.
Cause
Solution
Printhead is
too close to or
too far from paper.
Use printhead adjustment lever to move printhead
away from or toward paper.
Ribbon path
obstructed.
Check printhead for an extended print wire. If found,
replace printhead.
To replace printhead, see Oie instructions that
.Extended Print Wire
5 - 8
Advertising
This manual is related to the following products: