AMT Datasouth 41AY89AR777 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 4.2 DS-400 Mode Escape Sequences
ESCAPE SEQUENCE
FUNCTION
ESCA<n1>
Set line spacing to n/72 inch
ESCQ<n1>
Set right margin
ESC1 <n1>
Set left margin to <n1 >
ESC [ n1 s
Set left margin to column n1
ESC [: n1 s
Set right margin to column n1
ESC [ n1 ; n2 s
Set left margin to column n1 and set right margin to
column n2
ESC [ n1 r
Set top margin to line n1
ESC [: n1 r
Set bottom margin to line n1
ESC 1 n1 ; n2 r
Set top margin to line n1 and set bottom margin to
n2
ESC I n1 u
Set horizontal tab stop at column n1
ESC [ n1 : n2 u
Set horizontal tab stop at column n1 and at column
n2
ESC I n1 : n2 ;
Set horizontal tab stop at column n1
ESC B <n1> <n2>...<0>
Set vertical tab (up to 32 tabs). This escape
sequence also deletes all previously set tabs.
ESC1
Set horizontal tab at active column
ESC 2
Clear all horizontal tabs
ESC[g
Clear horizontal tab at active column
ESC3
Set verticeil tab at active line
ESC[1g
Clear vertical tab stop at active line
ESC 4
Clear all vertical tabs
ESC I n1
V
Set vertical tab stop at line n1
ESC [ n1 ; n2
V
Set vertical tab stop at line n1 and line n2
4-6