AMT Datasouth 41AY89AR777 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 4.6 Diablo Escape Sequences
ESCAPE SEQUENCE
FUNCTION
ESC i <n1>
Set left margin to <n1> Note: “I” is ASCII code 6CH.
ESC [ n1 s
Set left margin to column n1
ESC [; n1 s
Set right margin to column n1
ESC [ n1 : n2 s
Set left margin to column n1 and set right margin to
column n2
ESC [ n1 r
Set top margin to line n1
ESC [; n1 r
Set bottom margin to line n1
ESC [ n1 ; n2 r
Set top margin to line n1 and set bottom margin to
n2
ESC I n1 u
Set horizontal tab stop at column n1
ESC [ n1 ; n2 u
Set horizontal tab stop at column n1 and at column
n2
ESC [ n1 ; n2 :..... nx u
Set horizontal tab stop at column n1 n2....nx (where
x<15)
ESC[g
Clear horizontal tab at active column
ESC[1g
Clear vertical tab stop at active line
ESC [ n1
V
Set vertical tab stop at line n1
ESC [ n1 ; n2
V
Set vertical tab stop at line n1 and line n2
ESC [ n1 ; n2 ; ...nxv
Set vertical tab stop at n1, n2....nx
(wherex<15)
ESC [ n1 t
Set form length to n1 lines
EIGHTH BIT
CONTROL
ESC#
8th bit as is
PAPER OUT FEED
COMMAND
ESCJ<n1>
Perform n/216 inch line feed for one line
4-20