9 feature 11 - vertical pitch selection, 10 feature 13 - emulation mode – AMT Datasouth 41AY89AR777 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.4.9 Feature 11 - VERTICAL PITCH SELECTION
For maximum flexibility, the printer offers programmable vertical pitch
selection. The value shown in the digital display determines the number of
half-dot increments (.007 inches per step) of vertical paper motion that will occur
upon receipt of a line feed code. The default value for this feature is 24 steps (or
6 lines per inch). To half-step a line the value should be set to 12 which would
yield 12 lines per inch. The value for vertical pitch is determined as follows;
vertical pitch = n/144 lines per inch. Feature 39 may be used to select either 6 or
8 lines per inch.
2.4.10
Feature 13 - EMULATION MODE
By setting Feature 13 to the desired value, the operator may set the printer to
DS-180, IBM Graphics Printer, Epson MX 80/100 or Diablo 630 mode.
Mode
Front Panel Value
Escape
Sequence
Datasouth printer
1
ESC$F13;1.
IBM Graphics Printer
2
ESC$F13;2.
IBM Twinaxial
Emulation
(Available on TX models only)
IBM Coaxial Emulation
(Available on CX models only)
Datasouth DS-180
5
ESC$F13;5.
Epson MX 80/100
6
ESC$F13;6.
Diablo 630
7
ESC$F13;7.
LA-120
8
ESC$F13;8.
2-11