AMT Datasouth 41AY89AR777 User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In the completed escape sequence given below:
The downloaded character is not descended so the attribute a is equal to 128.
n and m are both equal to 61, (Decimal value of the “=” character).
entry
sequence
GHR$(27);
; CHR$(0);CHR$(61);CHR$(61); CHR$(128);CHR$(6) ; CHR$
P3
P4
P5
P6
P7
P8 P^
'CHR$( 18)' ;'CIffi$o3 ;S
r
$(^
; CHR$( 18); CHR$(8); CHR$(6);
PIO Pll
CHR$(0))CHR$(0);
This escape sequence is foimd in the sample program given in Figure 4.3 lines
150 through 230.
The following rules must be observed when downloading user defined characters:
•
When downloading a draft character, data bytes plO and pi 1 are always
ignored by the printer.
•
•
When more than one character is sent in an escape sequence, each character
must have an attribute byte.
•
Dots may not be printed in adjacent columns of the same dot position.
• The type of character to be downloaded (pitch and font), must be the same as
the active character set.
4-29