AMT Datasouth 41AY89AR777 - Manual (Page 30)

Table 2.1 Operator Panel Controls and Indicators
Key or Indicator Function
Form T Key Press this key to move the form downward 1/144 inch for
precise form alignment. Do not reverse the paper more
than one line. This paper movement does not register
electronically in the forms control program. This key may
be used while the printer is operating.
Enter Setup Key Press this key to enter setup mode.
Exit Setup Key Press this key to exit setup mode.
Display A Key Press this key to increase digital display value when in
Setup mode.
Display T Key Press this key to decrease digital display value when in
Setup mode.
Set Key When in Setup mode, pressing this key sets the numeric
value of the parameter in the display (value features). It is
also used to set the “ON” or “ENABLED” condition on
features 27 through 99 (discrete features).
When the printer is not in set up mode, the Set key is used
to set the top of form. (See Setting Top of Form).
Clear Key Press this key to set an “OFP or “DISABLED” condition
on discrete features. It also terminates self-test.
Feature Value
Key Press this key to display the value of the parameter
currently addressed.
Feature Number
Key Press this key then press the Display A or Display T key
to select the desired feature number.
2-3