AMT Datasouth 41AY89AR777 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 4.3 DS-180 Mode Escape Sequences
ESCAPE SEQUENCE
FUNCTION
ESC [: n1 s
Set right margin to column n1
ESC [ n1 ; n2 s
Set left margin to column n1 and set right margin to
column n2
ESC [ n1 r
Set top margin to line n1
ESC [; n1 r
Set bottom margin to line n1
ESC [ n1 : n2 r
Set top margin to line n1 and set bottom margin to
n2
ESC [ n1 u
Set horizontal tab stop at column n1
ESC [ n1 ; n2 u
Set horizontal tab stop at column n1 and at column
n2
ESC [ n1 ; n2 ;..... nx u
Set horizontal tab stop at column n1, n2...nx (where
x<15)
ESC B <n1> <n2>...<0>
Set vertical tab (up to 32 tabs). This escape
sequence also clears all previously set tabs.
ESC1
Set horizontal tab at active column
ESC 2
Clear ail horizontal tabs
ESC[g
Clear horizontal tab at active column
ESC3
Set vertical tab at active line
ESC[1g
Clear vertical tab stop at active line
ESC 4
Clear all vertical tabs
ESC [ n1
V
Set vertical tab stop at line n1
ESC [ n1 : n2
V
Set vertical tab stop at line n1 and line n2
ESC [ n1 ; n2; ....nx v
Set vertical tab stop at n1, n2....nx (where x < 15)
ESCC<n1>
Set form length
ESC [ n1 t
Set form length to n1 lines
EIGHTH BIT CONTROL
4-11