AMT Datasouth 41AY89AR777 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 4.2 DS-400 Mode Escape Sequences
ESCAPE SEQUENCE
FUNCTION
FEATURES
ESC-<n1>
Enable continuous underline n=1 or <1 >
Disable continuous underline n=0 or <0>
ESCS<n1>
Enable superscript n=0 or <0>
Enable subscript n=1 or <1 >
ESCT
Cancel superscript and subscript
ESC $ n1 s
Set front panel feature number n1
ESC $ n1 c
Clear feature number n1
ESC $ F n1 : n2.
Sets any value feature except baud rate and
vertical and horizontal tabs. n1 equals feature
number and n2 equals value.
ESC$ @
Restore carriage
ESC @
Reset to start-up condition
ESC 8
Paper sensor off
ESC 9
Paper sensor on
ESCN<n1>
Enable perforation skip n1= number of lines
ESCO
Cancel perforation skip
CHARACTER SETS
ESC(B
Selects US ASCII
ESC (A
Selects UK ASCII
ESC(K
Selects German
ESC(R
Selects French
ESC(H
Selects Swedish/Finnish
ESC(C
Selects Swedish/Finnish
ESC(E
Selects Norwegian/Danish
4-4