AMT Datasouth 41AY89AR777 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table 4.3 DS-180 Mode Escape Sequences
ESCAPE SEQUENCE
FUNCTION
ESC $6
Select primary character set
ESC % <1> <0>
Select downloaded characters
ESC % <0> <0>
Select ROM based characters
ESC&C
Clear downloaded characters
ESC & <0> <n1 > <n2>
<a> <p1 > <p2>..<p11 >
Download character definition
CARRIAGE CONTROL
ESC<
Print 1 line from left to right
ESC U <n>
Enable unidirectional print n=1 or <1>
Cancel unidirectional print n=0 or <0>
ESC [ 20 h
Enable carriage return on receipt of LF, FF or VT
ESC 1201
Disable carriage return on receipt of LF, FF or VT.
Note: “I” is ASCII code 6CH.
FORMAT CONTROL
ESC [ n1 ‘
Set active column to column n1
ESC [ n1 a
Advance active column by n1 columns
ESCO
1/8-inch line spacing
ESC [ n1 d
Set active line to line n1
ESC [ n1 e
Advance active line by n1 lines
ESC 11z
Set verticeil pitch to 6 lines per inch
ESC[2z
Set vertical pitch to 8 lines per inch
ESCA<n1>
Set line spacing to n/72 inch
ESCQ<n1>
Set right margin
ESC1 <n1>
Set left margin to <n1>.
Note: T is ASCII code 6CH.
ESC [ n1 s
Set left margin to column n1
4-10