AMT Datasouth 41AY89AR777 - Manual (Page 29)

Table 2.1 Operator Panel Controls and Indicators
Key or indicator Function
Power Indicator LED (Light Emitting Diode) glows steadily when power is
on.
On line Indicator LED glows steadily when the printer is on line.
Setup Indicator Flashes while printer is in setup mode.
Error Indicator LED blinks when an error condition occurs.
Paper out
Indicator LED blinks when paper-out condition occurs.
Digital Display Displays feature numbers
On line Key Press this key to place the printer on line.
Off line Key Press this key to place the printer in the local or off line
condition. The local condition will signal BUSY on the
communications interface.
Reset Key Press this key to restore the carriage to the left most
position and clear the buffer.
Continue Key Press this key to resume operation after an error or
paper-out condition has been corrected. Do not press the
Continue key until after the error has been corrected.
Line Feed Key Press this key to generate a line feed. If the key is
depressed for more than .5 seconds, the paper will
advance continuously until the key is released. This paper
movement is registered electronically in the forms control
program.
Form Feed Key Press this key to generate a paper movement to the top of
the next form. This key operates in either the off line or on
line condition. This paper movement is registered
electronically in the forms control program.
Form A Key Press this key to move the form upward 1/144 inch for
precise form alignment. This paper movement does not
register electronically in ttie forms control program. This
key may be used while the printer is operating.
2-2