AMT Datasouth 41AY89AR777 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9.
Align the right tractor with the right side of the paper and lock it into position.
Place the paper into the tractor.
10. Set the top of form as follows:
Advance the form into the required position by using the Line Feed,
Form A, and Form ▼ keys.
Press the Set key so that the digital readout displays 1, indicating line 1.
Press the Form Feed key.
Result:
The paper advances by one sheet and stops at the preset
top-of-form position.
11. If necessary, readjust the printhead-to-platen gap (described in
Paragraph 1.7.1).
12. As a final check, make certain the paper is proparly aligned and is resting flat
against the platen with no wririlding or buckling. The paper path to the
printer must be unrestricted (paper should not travel across desk comers or
other objects).
NOTE;
To determine if the form is correctly positioned,
you can run the print-test procedure which prints test data.
This procedure is described in Paragraph 1.8.
1-12