Denso BHT-6000 - Manual (Page 33)

18
NOTE
NOTE
NOTE
NOTE
REFERENCE
When you first load batteries (or battery cartridge) after purchase or you load them
(it) after leaving the BHT-6000 unused for a long time, do not remove the batteries
(battery cartridge) within 24 hours after that loading.
Do not leave the BHT-6000 with no batteries or battery cartridge loaded for a long
time. Doing so may cause loss of memory contents as well as a system error while
showing the message "System error! Contact your administrator. Note the error
drive. (DRIVE X)" on the LCD.
When disposing of the battery cartridge, cover the terminal pins with vinyl tape to
prevent short-circuit.
An early upload of gathered data is recommended, since the data stored in the RAM
might be affected by the so-called "soft error" or other environmental phenomena.
The BHT-6000 has an integrated rechargeable lithium battery which backs up
the memory in the BHT-6000 when no batteries or battery cartridge is loaded
or the voltage level of the batteries or battery cartridge drops below the
specified level. The lithium battery is automatically charged by the batteries
or battery cartridge.