East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit - Manual (Page 41)

P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
31
A. Attach a supplied 4"x12" 90º molded rubber
hose to the upper port of the water cooler
pointing uphill back into the engine bay.
Secure with supplied nylon ratchet clamp.
See fig 4B, 4C.
B. Locate another 4"x12" 90º molded rubber
hose and trim 1.50” from the short leg.
Discard the trimmed portion of the hose and
attach the short leg to the bottom port of the
water cooler, facing straight down. Secure
with nylon ratchet clamp. See fig 4A, 4B.
C. Loosely attach the supplied left and right
water cooler mounting brackets using the hex
head ¼-20 x 0.5” screws with washers.
4. WATER COOLER INSTALLATION
Fig 4B
Fig 4C
Fig 4A
UPPER PORT
UPPER PORT
NOTE: Refer to fig 4T for general CAC layout and hose rout-
ing.