East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit - Manual (Page 59)

P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
49
A. Remove the three (3) 10mm headed screws
from the passenger side of the water pump.
Clean all mounting bolt surfaces of the water
pump and passenger side cylinder head at
this time. See fig. 7A, 7B.
B. Pre-assemble the supplied tensioner bracket
and idler bracket using the spacers and hard-
ware as shown. See fig 7C.
7. BELT TENSIONER BRACKET INSTALLATION
Fig 7A
Fig 7B
Fig 7C
M10 X 1.5 X 50MM
W/ .75" SPACERS
M8 X 1.25 X 120MM
W/ 1.36" SPACERS