East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit - Manual (Page 55)

P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
45
A. Locate the supplied washer fluid tank and
ensure that the straight 5/8” barb fitting is
installed as shown in Fig. 6A.
B. Install the previously-removed OEM washer
pump and grommet into the similar location
on the new reservoir. See fig. 6B.
C. Install the supplied bracket onto the reservoir
using the supplied ¼-20 bolts and washers
as shown in Fig. 6A.
D. Install the plain cap onto the reservoir and
tighten securely.
E. Place the reservoir assembly onto the driver
side frame rail with the bracket seating
squarely against the underside as shown in
Fig. 6D. Mark the position of the three (3)
mounting holes onto the underside of the
frame rail.
6. WINDSHIELD WASHER
RESERVOIR INSTALLATION
Fig 6B
Fig 6A