East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual
Page 76
P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
66
W. Temporarily position the surge tank bracket
onto the vehicle as shown and mark the hole
locations with a punch. See fig 8AB.
X. Use a 1/4” drill bit and drill out the holes on
the cowl.
Y. Mount the bracket on the underside of the
cowl using the two (2) supplied ¼-20x.375"
button head screws. See fig 8AC.
Z. Mount the surge tank to the bracket using the
two (2) supplied ¼-20-.5" socket head cap
screws.
AA. Re-install the cowl trim panel and re-insert
the three body clips previously removed.
Reattach the cowl weather stripping.
AB. Trim the previously installed ¾” hose coming
up from under the power distribution block
and attach it to the bottom fitting on the surge
tank. Secure hose using a nylon ratchet
clamp. See fig 8AD.
Fig 8AC
Fig 8AD
Fig 8AB
NOTE: Do not use washer under the button head screws.