East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual
Page 94
P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
84
D. The reflash tool should power up and display
PROGRAM VEHICLE at the top of the
screen. Press the SELECT button. See fig
11D.
E. PREPROGRAMED TUNE will be displayed at
the top of the screen. Press the SELECT
button. See fig 11E.
F. Read the disclaimer entirely, then press the
SELECT button if you agree with the terms of
the disclaimer. See fig 11F.
G. At this point you will need to turn the ignition
to the ON position (do not start the vehicle).
Set the parking brake and press the SELECT
button to continue. See fig 11G.
H. The reflash tool will proceed to check the
Operating System (OS) part number of the
vehicles ECU. See fig 11H.
NOTE: If you have any questions throughout this proce-
dure, please contact our service department for
further assistance.
Fig 11D
Fig 11E
Fig 11F
Fig 11G
Fig 11H