East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit User Manual
Page 51
Advertising
P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
41
Fig 5H
Fig 5I
K. Position relay on the passenger side upper
radiator core support, adjacent to the coolant
fill tube. Mark the position and drill a hole
using an 11/64” drill bit. See fig 5G.
L. Using #12 sheet metal screws, attach the
relay ground and mount the relay. See fig
5H.
M. Route and trim the yellow relay wire to the
#20 fuse (Engine power) on the power distri-
bution block. Using a fuse tap, connect the
wire to the fuse as shown. See fig 5I, 5J.
Fig 5G
DRILL 11/64"
NOTE: Use a multimeter to verify a positive ground con-
nection. If necessary remove the paint in the local-
ized area of the ground connection.
Advertising