East Coast Supercharging Lysholm 2010+ Camaro Supercharger Kit - Manual (Page 64)

P/N: 4LGE020-010 v1.1, 2011-04-29
© 2011 Lysholm
All Rights Reserved, Intl. Copr. Secured
54
H. Assemble a supplied idler pulley as shown:
Insert M10x1.50x90mm screw with washer
through the idler dust shield, through the sup-
plied idler, and then through the pilot spacer.
See fig 7P.
I. Install the supplied .75” thick spacer between
the two mounting brackets in line with the top
most hole. Insert the previously assembled
idler and M10 screw through the brackets
and spacer and then tighten into the installed
PEM nut. See fig 7Q.
J. Tighten all the screws mounted on the idler
bracket. See fig 7R.
Fig 7Q
Fig 7R
Fig 7P
.75" SPACER
.75" SPACER