Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 136)

122 Connecting Devices on a Power Line Repeating Network
3. From the Webbinder Destinations tree on the right frame, expand the SmartServer Webbinder
destination icon, expand the network icon, expand the LON channel, expand the device and
functional block containing the desired target data point, and then click one or more compatible
target data points.
4. Click Submit. References to the target data points are added underneath the source data point in
the local SmartServer tree on the left frame.
Connecting Repeating Devices to Other Networks
You can create a Web connection between a repeating device on a power line repeating network to a
device on another repeating network or to a device on a non-repeating network. To do this, follow
these steps:
1. From the SmartServer attached to the FT-10 or PL-20 non-repeating network, add a remote
SmartServer to the LAN representing the SmartServer attached to the PL-20 repeating network.
To do this, follow these steps: