Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 99)

i.LON SmartServer 2.0 Power Line Repeating Network Management Guide 85
4. By default, the name of the one-time exception is the date on which it is being created. You can
enter a different, descriptive name in the box at the top of the dialog. Additionally, you can click
the box to the right of the one-time exception name to open the Edit Exception dialog and change
the scope, dates, and recursions of the exception. See Defining Exception Dates and Recursions
later in this chapter for more information on the properties in this dialog.
5. Select the Show Sunrise/Sunset Functions check box to create events based on sundown and
sunrise times. In the Function box, select the Sunrise ( ) or Sundown ( ) icon. The calculated
sunrise or sundown time appears in the Time box, which becomes read-only, and an Offset box is
added to the right of the Time box. In the Offset box, you can enter the time before or after
sunrise or sundown that the event is to occur.
6. Specify the start and end time of the one-time exception following these steps:
a. In the Time box under the From property, enter the exact time the event is to start.
b. In the Time box under the To property, enter the exact time the event is to end.
c. In the Value box, do one of the following: