Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 37)

i.LON SmartServer 2.0 Power Line Repeating Network Management Guide 23
3. Verify that you have exited the SmartServer console application if you were accessing it via
Telnet. Otherwise, the SmartServer cannot receive the device data from the Pocket PC because
the console port is blocked.
4. Tap Send. A dialog appears informing you that the transmission of the device data has started.
The device data is sent to the SmartServer via the iLonProxyPocket application.
5. Once the transmission has been completed, a dialog appears informing you that device data has
been successfully sent to the SmartServer.
Note: If the following warning appears informing you that the transmission has failed, re-check
the physical connection between the Pocket PC and the SmartServer and verify that the
iLonProxyPocket application is configured correctly for the connection being used.