Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 58)

44 Maintaining a Power Line Repeating Network
b. The Online Measurement dialog opens.
c. This dialog displays the following statistics:
Time Stamp Displays the time at which the device last responded to a network
message.
Frequency in Use Displays the frequency carrier of the signal at the hop (Primary or
Secondary). For more information on the use of these frequency
carriers on a L
ON W ORKS power line channel, see the L ON W ORKS PLT-
22 Power Line Transceiver User’s Guide (110kHz - 140kHz
Operation).
Signal Strength Direct Communication Devices: Displays the real-time
measurement in dB of the signal strength at the device.
Proxies and Target Devices: Displays the real-time measurement in
dB of the signal strength at the hop. This value is the minimum of the
signal strengths measured by the device from its proxy and by the
proxy from the device.