Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 53)

i.LON SmartServer 2.0 Power Line Repeating Network Management Guide 39
Alternatively, you can click Setup and then click Power Line Repeating Analysis.
8. The Power Line Repeating Analysis Web page opens.
The rows in this Web page represent established repeating paths between the listed devices. The
target device in a repeating chain is listed furthest to the right. The current chain of repeating
devices used to relay messages to the target device are listed to the left of the target device. The
repeating chains lead back to the SmartServer, which is listed furthest to the left under the Center
column.
The repeating chains of the first 20 repeating devices listed in the tree view are displayed in this
Web page. Devices that have been installed successfully are marked black, devices in the process
of being installed are marked orange, and devices with communication failures or other errors are
marked red.
To view the repeating chain of another device, click that device in the tree. To view multiple
additional devices, click a device in the tree, and then either hold down CTRL and click all other
additional devices to be viewed, or hold down SHIFT and select another device to view the entire
range of additional devices.
To view the repeating chain of a specific device, click one of the 20 blue-highlighted devices in
the tree to clear the pre-selected devices and then click the device to be viewed. To view the
repeating chains for a set of specific devices, click one of the 20 blue-highlighted devices in the
tree to clear the pre-selected devices, click a device in the tree, and then either hold down CTRL