Statement of china-rohs compliance, Statement of china-rohs compliance –67 – Altera Stratix IV GX FPGA Development Board User Manual

Page 75

Advertising
background image

Chapter 2: Board Components

2–67

Statement of China-RoHS Compliance

November 2010

Altera Corporation

Stratix IV GX FPGA Development Board, 530 Edition Reference Manual

The remote sense is routed to the FPGA's diode pins to measure the voltage drop. For
very accurate temperature readings, the I/O adjacent to the FPGA diode sense pins
must be halted.

Table 2–60

lists the temperature sense interface pin assignments, signal names, and

functions.

Table 2–61

lists the temperature sense component reference and manufacturing

information.

Statement of China-RoHS Compliance

Table 2–62

lists hazardous substances included with the kit.

Table 2–60. Temperature Sense Pin Assignments, Schematic Signal Names, and Functions

Board

Reference

Description

Schematic Signal

Name

I/O Standard

MAX II CPLD EPM2210

System Controller

Pin Number

Stratix IV GX

Device

Pin Number

U27.14

SMB clock

SENSE_SMB_CLK

2.5-V

R1

W34

U27.12

SMB data

SENSE_SMB_DATA

R4

AH32

U27.9

Programmable
over-temperature

OVERTEMPn

P5

U27.11

Programmable alert

TSENSE_ALERTn

M2

Table 2–61. Temperature Sense Component Reference and Manufacturing Information

Board Reference

Description

Manufacturer

Manufacturing

Part Number

Manufacturer

Website

U26

Temperature sense, remote and
local, programmable alert.

Maxim

MAX1619MEE+T

www.maxim-ic.com

Table 2–62. Table of Hazardous Substances’ Name and Concentration

Notes

(1)

,

(2)

Part Name

Lead

(Pb)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr6+)

Mercury

(Hg)

Polybrominated
biphenyls (PBB)

Polybrominated

diphenyl Ethers

(PBDE)

Stratix IV GX development board

X*

0

0

0

0

0

12 V power supply

0

0

0

0

0

0

Type A-B USB cable

0

0

0

0

0

0

User guide

0

0

0

0

0

0

Notes to

Table 2–62

:

(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the

SJ/T11363-2006 standard.

(2) X* indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant

threshold of the SJ/T11363-2006 standard, but it is exempted by EU RoHS.

Advertising